-
Trapping Part 2: Partial Overlap in Printing
Overlapping elements create visual depth and hierarchy. Below is a clear example of trapping: color overlapping to prevent white gaps caused by misregistration in printing. Come back later…
4 min read
-
Trapping Part 1: Settings When Designing for Print
When designing for print, color output is critical to the quality of the project. This will be a 10-part series on Trapping. Below is an exercise in the…
4 min read
-
My “Meet, Greet, and Repeat” Experience
Today, I attended Lawrence and Schiller’s, a design agency in Sioux Falls, internship event, “Meet, Greet, and Repeat,” where I sat down with approximately 20 staff members for…
4 min read
-
What’s the difference between a Printers and Readers Spread?
There is a huge difference between a printer magazine spread and a reader magazine spread. A reader spread is the document’s consecutive pages, while a printer spread is…
4 min read
-
Cleaning the Laser Lens
Maintaining the upkeep on your laser is important to maintaining the quality of your projects. A dirty laser can cause burnt edges and imprecise engraving. Here’s what you…
4 min read
-
4 min read
